L2TP Setup on Windows Phone

Share This!

With the recent updates released by Microsoft on mobile devices that’s using the Windows Phone 8.1 Operating System, the option to connect to a VPN network
via the L2TP protocol is added.

Unfortunately, we do not currently have a Windows Phone with us and so have not been able to thoroughly test our service on it but we have confirmation that it works with Nokia Lumia 930 by following the steps listed below.

Checking your version

You would need to ensure that your mobile device is running on at least Windows Phone 8.1 Update 1.

To check your Windows Phone Version, go to Start, and flick left to the App list

Now, tap on Settings > About > More Info

Note: The software section will indicate the general product release name (i.e. Windows Phone 8.1) while the OS version section indicates the specific
build number of the release (i.e. “7.10.8858.136”).

If your OS version is any of the below, you should be able to see the L2TP option:
OS version: 8.10.14141.167, 8.10.14147.180, 8.10.14157.200, 8.10.14176.243, 8.10.14192.280, 8.10.14203.206, 8.10.14219.341, or 8.10.14226.359

 

This is to check which Windows Phone version are you current using, up to the build number.

You can also visit the link below for more information on how to check which version of Windows Phone you’re currently using.

http://www.windowsphone.com/en-us/how-to/wp8/basics/which-version-of-windows-phone-do-i-have

Setting up the VPN

Once you’ve confirmed the version of Windows Phone you’re using, please follow the steps below on setting up on our VPN service on your device.

1 – Go to the App List by scrolling down the main screen until you see an arrow as shown below. Once you see the arrow, please tap on it

 

Scroll down the Windows Phone home screen to reveal the App List arrow

 

 

2 – From the App List, scroll down until you see Settings and then select Settings

 

Scroll down the App List and look for Settings

 

3 – Scroll down until you see VPN and then select VPN

 

Scroll down again and look for VPN under the Settings tab

 

 

4 – Tap on the ‘+’ sign below to create a VPN profile

 

The main screen of the VPN settings

 

 

5 – You would have to set the servername as GBR.mypn.co

 

Adding the server name to a new VPN profile

6 – Ensure that the VPN Type is L2TP with IPSec

 

Setting the VPN type to L2TP in the new VPN profile

 

7 – Ensure that that Username + Password + Preshared Key option is selected under Connect Using

 

You would have to connect to our service using a username, password and also a preshared key.

 

 

8 – Enter your MPN Username and Password in the appropriate field. The Preshared Key is private

 

Enter your VPN username, password and then the preshared key: private

 

9 – Turn on Send All Traffic. The Profile Name can be anything you want to name this connection, for example: GBR.mypn.co

 

Please ensure that send all traffic is turned on, else, you wouldn't get a VPN IP even if you appear to be connected. Then save the profile name to anything that you want.

10 – Save the profile. Once you’re connected to our servers, there will be a padlock on the top left corner of the WiFi icon or the LTE/3G icon. Below the VPN profile that you’ve created and saved, it should show connected after that.

 

Once connected, you'll see a padlock icon on the top left corner on whatever network you're connected to. Under your VPN profile, connected can be seen

 

 

If you want to connect to any of our other servers, you will need to change the server name to the appropriate server.
e.g. for our US service, change the server name to USA.mypn.co

Any problems?

Unfortunately it doesn’t always go to plan!

If you have any problems or can’t get connected, please email us at [email protected]. We’ll get back to you as soon as possible and try to help.