Setting up your Linux Fedora computer to connect to My Private Network’s VPN should take just a few minutes using the PPTP protocol. Please note that your computer needs to be connected to the Internet and able to browse the web before moving on with the instructions below. The steps below are for Linux Fedora 22 but the steps should apply to most RPM or Debian based Linux systems.

While we recommend using our SSL OpenVPN application as the first option to connect to our service on Linux Fedora, there might be some cases where this might not work well on your network. In this case, you can try this alternative PPTP VPN connection, which is much easier to setup compared to the other protocols.

Not yet registered? It’s quick and easy, Sign Up now!

Check Internet Connectivity

 

Make sure your system is connected to the internet and that you are able to browse the web. To check your location, please go to our IP Info page.

 
IP Info
 
This shows the IP Address and country that you are currently connecting from, in this example, the user is connecting from Singapore.

Getting Started

 

From the desktop click on the group of icons in the top right corner and click on your Network Connection.

 

This could be Wireless or Wired, depending on how you are connected to the Internet on this system.

 
Fedora Network option in taskbar
 
Click on Wired Settings
 
Fedora select network connection settings
 

Click the + (Plus) button to create the new VPN connection.

 
Fedora add network connection
 
Select VPN.
 
Fedora select VPN interface
 
Now select PPTP as the VPN type.
 
Fedora select PPTP VPN

PPTP Connection Configuration

 
Now enter the VPN details as below:
 
Fedora PPTP VPN settings
 
Connection name: MPN GBR
Gateway: gbr.mypn.co (assuming you’re setting up a VPN connection to the U.K)
 
Note: If you wish to use our Free service, the servername that you need to use is fre.mypn.co and your connection will be rotated between different countries we have in our Free VPN cluster.
 
To connect to any of our other servers, (ie. our USA servers) simply change the Server name and rename the Connection name to reflect another location. For a list of server names, please refer to our complete list of servers here.
 

Next, enter your My Private Network Username and Password that you registered with and then click Advanced.

Advanced PPTP Configuration

 
Please ensure that the only authentication method used is MSCHAP. To achieve this, uncheck PAP and CHAP and ensure that MSCHAP and MSCHAPV2 are the only methods selected.
 
Fedora PPTP VPN advanced settings
 

Check the box labelled Use Point to Point encryption (MPPE) and then click OK.

 

Click Save to save the VPN configuration.

Enabling VPN Connection

 

Now start the VPN connection by clicking on the Network Manager icon again, and click on VPN and click on Connect.

 
Fedora Connecting to VPN
 

Enter you My Private Network Password if it prompts you.

 

After a few moments, click on the Network Manager icon again in the top right and it will now show that the VPN is connected.

 
Fedora VPN Connected

Check your IP Address

 

If you now check your IP address again from the IP Info page, your location should show that you are now in the U.K (or which ever country you have connected to).

 
IP sample UK
 

Note: the server IP address and country name will vary depending on the server or country you are connected to.

 

That’s it! You are now connected. All your internet traffic will now be transmitted securely via our VPN servers through the country you had configured.

Any Problems?

 

Unfortunately it doesn’t always go to plan!

 

If you have any problems or can’t get connected, please email us at This e-mail address is being protected from spambots. You need JavaScript enabled to view it
. We’ll get back to you as soon as possible and try to help.