Setting up your Windows 10 computer to use My Private Network’s MyTelly service should take just a few minutes by following the steps below. Please note that your Windows computer needs to be connected to the Internet and able to browse the web before moving on with the instructions below. You do not need to be connected to our VPN for MyTelly to work, kindly disconnect from the VPN if you have it turned on.

Using a different version of Windows? Select your correct Windows version for the MyTelly setup below:
 
Windows 8 Smart DNS MyTelly Setup
Windows 7 Smart DNS MyTelly Setup

Not yet registered? It’s quick and easy, Sign Up now!

Check MyTelly DNS Settings

 
Login to our website, www.my-private-network.co.uk from your computer browser and you should be redirected to the My Subscription page.
 
Select the MyTelly tab on the left hand corner of the screen and click on Setup.
 
Check MyTelly Settings
 
Take note of the DNS server addresses that appears on your screen, you’ll need it during the setup later.

Setup MyTelly on your Windows 10

 
Right-click on the Wifi/Internet icon on the bottom right hand side of your taskbar and click on Open Network & Internet Settings.
 
Open Network & Internet Settings
 
In the next screen, under Status, please click on Change Adapter Options.
 
Change Adapter Options
 
Right-click on your active network adapter (Local Area Connection or Wireless Network Connection) and select Properties.
 
Properties
 
Double-click on Internet Protocol Version 4 (TCP/IPv4) or alternatively, you can select it and click on Properties.
 
IPv4
 
In the General tab, click on ‘Use the following DNS server addresses‘ and enter the DNS server addresses that appeared in Step 1.
 
Note: The DNS addresses shown in the images here are just examples. Please follow the ones displayed on your own screen as indicated in Step 1.
 
DNS Server Address
 
Click OK to save your changes and head back to the MyTelly Settings page.

Register IP Address for MyTelly

 
Scroll down and click on Register This Address. This will register your IP address and also test your DNS setup to indicate whether you have configured the DNS settings correctly.
 
Check MyTelly Settings
 
You will get a Your DNS is configured correctly! Enjoy! message on your screen if your DNS has been set successfully on your system.
 
Confirm MyTelly Settings
 
Note: You will not have to do it again unless your IP address changes. Also, any device on the same network will be able to use the MyTelly service as long as you’ve set our DNS on their device’s settings.
 
Now that you have setup and registered your system, you can go ahead and access any TV content providers that we support!

Any Problems?

 
Unfortunately it doesn’t always go to plan!
 
If you have any problems or can’t get MyTelly to work, please email us at [email protected]. We’ll get back to you as soon as possible and try to help.